Description
Ducted Vacuum Wall Inlets Valves White 2(pk) Made In Canada
Description:
Universal “Vacuvalve” inlet valve is the industry standard in ducted vacuum wall plates. With internal contact pins and locating tabs to suit all kinds of hoses (with or without a switch) for ducted vacuums.
Features:
- 2 x inlets
- Made in Canada
- Colour – White.
- Face dimensions – 90mm wide x 132mm high x 10mm deep.
- Hose hole diameter – 38mm
- 2 pin connection.
- Screw fixings – 98mm apart.
Suitable for:
- All Ducted Vacuum Cleaners including
- Astrovac all models
- Auskay all models
- Lux all models
- Aussievac all models
- Beam all models
- Central Vac all models
- Das all models
- Electrolux all models
- Electron all models
- Hoover all models
- Hills all models
- Premier Clean all models
- Pullman all models
- Silent Master all models
- Starvac all models
- Vacumaid all models
- Volta all models
Instructions:
- When connecting the cable, do not take the screw out completely, you may loose a tiny spring behind screw.
- There is no polarity in the wiring connection, so either way is fine. Please make sure the two wires do not touch each other.
- If you just purchase a switch hose and found out that your switch hose does not work on your system, it is probably because your old inlet is not a dual-pin type, hence they won’t be compatible with a switch hose. You will need to replace your inlet with this inlet for your switch hose to work.
